Duct - Air Wave - LH (RHD) (Remove and Replace)
Correction code
1405040002
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH footwell cover. See Cover - Footwell - Front Passenger (RHD) (Remove and Replace).
- Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
- Remove the glove box. See Glove Box (RHD) (Remove and Replace).
- Remove the LH footwell duct. See Duct - Footwell - LH (RHD) (Remove and Replace).
-
Disconnect the electrical harness from the LH instrument panel air wave duct
thermistor connector.
-
Remove the clips (x2) that attach the LH air wave duct to the instrument panel.
-
Remove the LH instrument panel air wave duct from the HVAC module.
-
Remove the thermistor from the LH instrument panel air wave duct.
-
Remove the LH instrument panel air
wave duct.
Install
-
Install the thermistor to the LH instrument panel air wave duct.
-
Install the LH instrument panel air wave duct to the HVAC module.
-
Install the clips (x2) that attach the LH air wave duct to the instrument
panel.
-
Connect the electrical harness to the LH instrument panel air wave duct thermistor
connector.
- Install the LH footwell duct. See Duct - Footwell - LH (RHD) (Remove and Replace).
- Install the glove box. See Glove Box (RHD) (Remove and Replace).
- Install the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
- Install the LH footwell cover. See Cover - Footwell - Front Passenger (RHD) (Remove and Replace).