Load Floor - Trunk (Remove and Replace)
Correction code
1530030032
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the rear trunk.
-
Lift up the trunk floor trim
and remove it from the vehicle.
TIpUse the pull tab located at the rear edge of the trunk floor trim.
Install
-
Install the trunk floor to the vehicle.
- Close the rear trunk.