Duct - Footwell - RH (RHD) (Remove and Replace)
Correction code
1405020002
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the driver footwell cover. See Cover - Footwell - Driver (RHD) (Remove and Replace).
-
Use a clip pry tool to remove the clip that attaches the RH footwell duct to the
instrument panel bracket.
-
Remove the RH footwell duct from the HVAC module.
Install
- Install the RH footwell duct to the HVAC module.
-
Install the clip that attaches the RH footwell duct to the instrument panel
bracket.
- Install the driver footwell cover. See Cover - Footwell - Driver (RHD) (Remove and Replace).