09/11/2023 01:44:42

Grommet - Pump - Windshield Washer (Remove and Replace)

Correction code 1750020412 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Install

  1. Install the washer pump grommet to the windshield washer reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect the grommet for damage before installation.
  2. Install the windshield washer pump. See Pump - Windshield Washer (Remove and Replace).