Wheel Arch Liner - Rear - LH (Remove and Replace)
Correction code
1201020032
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Raise and support the vehicle. See GUID-0ECF2493-88F6-48E9-ADBB-9AE1D52E217C.html.
- Remove the LH rear wheel. See Wheel Assembly (Remove and Install).
-
Release the push clips (x8)
and fan clips (x7) that attach the LH rear wheel arch liner to the vehicle,
and remove the liner from the vehicle.
Install
-
Position the LH rear wheel
arch liner into the vehicle.
-
Install the push clips (x8)
and fan clips (x7) that attach the LH rear wheel arch liner to the
vehicle.
- Install the LH rear wheel. See Wheel Assembly (Remove and Install).
- Remove the vehicle from the lift.