17/10/2023 18:51:55
Bracket - Trunk Load Floor - LH (Remove and Replace)
Correction code 1530030042 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the trunk load floor. See Load Floor - Trunk (Remove and Replace).
- Remove the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
-
Remove the LH load floor bracket.
WarningThe video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
Install
- Install the LH load floor bracket.
- Install the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
- Install the trunk load floor. See Load Floor - Trunk (Remove and Replace).