Coat Hook - LH (Remove and Replace)
Correction code
1520010042
FRT
0.78
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Lower the rear headliner. See Headliner (Remove and Install).
-
Release the clips that
attach the bezel to the LH rear coat hook, and then remove the coat hook
from the headliner.
WarningThe video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
Install
-
Install the clips that attach the
bezel to the LH rear coat hook, and then install the coat hook to the headliner.
- Install the rear headliner. See Headliner (Remove and Install).
-
Run TEST-SELF_VCLEFT_REAR-DOME-LIGHTSvia Toolbox:(link)
- Connect a laptop with toolbox to the vehicle. See Toolbox (Connect and Disconnect).
- In Toolbox, select the Actions tab, and search for "TEST-SELF_VCLEFT_REAR-DOME-LIGHTS".
- Select "TEST-SELF_VCLEFT_REAR-DOME-LIGHTS", select "Run", and allow the routine to complete.
- Reinstall the vehicle software. See Software Reinstall - Touchscreen.
- Exit Service Mode Plus. See Service Mode Plus.