17/10/2023 18:55:01
Active Grill Shutter (Remove and Replace)
Correction code
1850010012
FRT
0.96
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the cooling fan module. See Cooling Fan Module (Remove and Replace).
-
Release the locking tabs (x14) that attach the active grille shutter to the
cooling fan and shroud assembly, and then remove the active grille.
Install
-
Install the active grille shutter onto the cooling fan and shroud assembly,
and then fasten the locking tabs that attach the shutter to the
assembly.
- Install the cooling fan module. See Cooling Fan Module (Remove and Replace).