Refer to the following chart for help in selecting the appropriate PPE (Personal
Protective Equipment).
Note
The illustrations below are for demonstration purposes only. This is not an
exhaustive list. Make sure the PPE is within expiration date and is proper before
use. For detailed information about specific PPE, please contact the local EHS
team.
Body
PPE
Name
Applicable
Scenes
Illustration
Head
Bump
Cap
Always wear when
inspecting or performing service operations under the
vehicle.
Ears
Protective
Earplugs/ Earmuffs
Always wear
during removal/installation, check, or service operations when
noise is 80 dB or above.
Eyes and
Face
Chemical Splash
Goggles
Always wear when
handling chemicals or performing painting
operations.
Safety
Glasses
Always wear when
in a service or collision shop.
Face
Shield
Always wear when
performing cutting and polishing operations.
Welding
Helmet
Always wear when
performing welding operations.
Respiratory
System
Purifying
Respirator
Always wear when
performing cutting, polishing and paint preparation
activities.
Supplied Air
Respirator
Always wear when
performing painting operations.
Hands
Cut-resistant
Gloves
Always wear
during removal/installation, checking or repairing metal sharp
parts, glass work.
High Voltage
Electrical Gloves with Leather Glove Protectors
Always wear
during interactions where high voltage may be present (for
example, remove/install high voltage components, take electrical
measurements). Class 1 HV gloves required for
Cybertruck.
Nitrile
Gloves
Always wear when
handling chemicals or waste.
Welding
Gloves
Always wear when
performing sheet metal welding operations.
Body
Cover
Always wear
during removal/installation, check or service
operations.
High Visibility
Vest
Always wear
during periods of low lighting, especially in parking
lots.
Hooded one-piece
Protective Suit
Always wear
during painting and paint preparation operations.