Tub Carpet - Rear Trunk (Remove and Replace)
Correction code
1530030022
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the trunk load floor. See Load Floor - Trunk (Remove and Replace).
- Remove the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
- Remove the LH and RH load floor brackets. See Bracket - Trunk Load Floor - LH (Remove and Replace).
-
Remove the rear trunk
tub.
Install
- Install the rear trunk tub.
- Install the LH and RH load floor brackets. See Bracket - Trunk Load Floor - LH (Remove and Replace).
- Install the trunk sill trim. See Trim - Trunk Sill (Remove and Replace).
- Install the trunk load floor. See Load Floor - Trunk (Remove and Replace).