Duct - Footwell - RH (Remove and Replace)
Correction code
1405030062
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
-
Remove the glove box. See Glove Box (Remove and Replace).
NoteNo need to remove the glove box USB cable.
-
Remove the RH footwell duct from the HVAC module.
Install
-
Install the RH footwell duct to the HVAC module.
- Install the glove box. See Glove Box (Remove and Replace).