Kit - Floor Mat - LHD (Remove and Replace)
Correction code
1530020042
FRT
0.05
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
- Open all four doors and lower all four windows.
-
Adjust the 1st row seats to
proper position, and then remove the front LH and RH floor mats from the
vehicle.
-
Adjust the 2nd row seat to
proper position, and then remove the rear floor mat from the vehicle.
Install
-
Adjust the 2nd row seat to
proper position, and then install the rear floor mat to the vehicle.
-
Adjust the 1st row seats to
proper position, and then install the front LH and RH floor mats to the
vehicle.
- Close all four doors and raise all four windows.