2024-04-11
Assembly - Fresh Air Gutter - HVAC (Remove and Replace)
Correction code
1810010052
FRT
0.06
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Warning
The video(s)
included in this procedure are meant as an overview for supplemental purposes only.
Follow all of the steps listed in the procedure to avoid damage to components and/or
personal
injury.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
-
Release the clips (x3) that attach the
cabin intake duct to the cowl screen panel, and then remove the duct from the
vehicle.
Install
-
Install the clips (x3) that attach the
cabin intake duct to the cowl screen panel.
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).