31/05/2024 10:55:25

Absorber - Wheelhouse - Rear - RH (Remove & Replace)

Correction code 15307202

Removal

  1. Perform Vehicle HV Disablement Procedure. See Vehicle HV Disablement Procedure
  2. Remove the rear HVAC assembly (refer to procedure)).
  3. Make slits in the RH rear wheelhouse absorber near the rear HVAC assembly to aid with removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    2x slit on marked positions. It is not necessary to disconnect the coolant hose.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage the coolant hose.
  4. Release the wiring harness and coolant hose clips from the RH rear vehicle body.
  5. Disconnect the RH rear C-pillar acceleration sensor.
  6. Move electrical harnesses and coolant hose out of the way, and then remove the RH rear wheelhouse absorber.

Installation

Installation procedure is the reverse of removal, except for the following:
  • Recharge the A/C system (refer to procedure).
    Informational PurposesAn informational icon, calling your attention
    Note
    After A/C refrigerant charging is finished, make sure that the A/C system functions correctly.
  • Calibrate the falcon doors (refer to procedure).