03/03/2020 13:18:43

Shield - Dust - Brake - Front - LH (Remove and Replace)

Correction Code 33011602

Removal

  1. Remove the front brake rotor (refer to procedure).
  2. Remove the screws (x3) that secure the dust shield to the knuckle (torque 8 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    If a screw is equipped with a spacer, ensure that the spacer is reinstalled on that screw during reinstallation.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  3. Remove the dust shield from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.