10/12/2024 15:28:03

Fixed Glass - Front Door - LH (Remove and Replace)

Correction Code 11501402

  • 2024-12-10: Added new caution about Pre-Installation Glass Inspection service requirements.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
New glass components (windshield, roof, door, and fixed glass) must be inspected before installation to meet Tesla’s internal standards of quality. Perform the inspection described in Pre-Installation Glass Inspection before beginning this procedure.

Removal

  1. Remove the inner belt seal (refer to procedure).
  2. Peel back the mucket seal, then remove the screws (x4) that secure the fixed glass (torque 4.5 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    There might be washers between the fixed glass and the door panel. Reinstall the washers when installing the fixed glass.
  3. Remove the fixed glass from the top of the door.

Installation

Installation procedure is the reverse of removal.