11/05/2022 01:42:39

Trim - Cushion - 2nd Row - RH (Bench Seat) (Remove and Replace)

Correction Code 13086602

Removal

  1. Remove the LH 2nd row bench seat assembly. See Seat Assembly - 2nd Row - RH (With 2nd Row Bench Seats) (Remove and Install).
  2. Push the outer side of the RH seat cushion inward and loosen the spring clip of the seat assembly release handle, and then remove the release handle.
  3. Release the push clip at the front of the outer side seat trim and loosen the bolt at the rear (torque 2.5 Nm), and then remove the outer side trim.
  4. Loosen the bolt (torque 45 Nm) of the RH seat belt, and then remove the seat belt from the RH seat.
  5. Loosen the bolt (torque 45 Nm) of the RH seat belt buckle , and then remove the seat belt buckle from the RH seat.
  6. Loosen the J-hooks (x2) that attach the rear lower seat cover to the seat, and then release the lower cover.
  7. Loosen the J-hooks (x7) that attach the upholstery to the underside of the bench seat.
  8. Disconnect the heat pad.
  9. Disconnect the occupancy sensor.
  10. Remove the cushion trim assembly from the RH rear bench seat.

Installation

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.