2025-01-28

Support Beam - Condenser (Remove and Replace)

Correction code 18201022

Remove

  1. Remove the cooling fan module. See Cooling Fan Module (Remove and Install).
  2. Remove the bolts (x4, torque 5 Nm) that attach the 3-way and 4-way valves to the condenser support beam.
  3. Remove the bolts (x2, torque 5 Nm) that attach the suction liquid jumper line to the condenser support beam.
  4. Remove the fir tree clips (x2) that attach the FDU outlet hose to the condenser support beam.
  5. Remove the bolts (x2, torque 9 Nm) that attach the condenser support beam to the vehicle, and then remove the condenser support beam.

Install

Installation procedure is the reverse of removal.