2026-09-25
Stabilizer Bar - Front (Remove and Replace)
Correction Code 31012202
CAUTION
If performing this
procedure as a result of a collision, see the Collision Repair
Manual to verify whether the steering gear must be
replaced as well.
Removal
- Remove the front subframe assembly from the vehicle. See:
- Remove the stabilizer bar from the front subframe
Installation
- Install the stabilizer bar to the front subframe.
- Install the front subframe assembly from the vehicle. See:
- Refer to the Alignment Requirement tables to determine whether an EPAS alignment check (EC) or four wheel alignment check (AC) is necessary. If performed, add the alignment check/adjust as a separate activity. See Alignment Requirement - Suspension.