03/03/2020 13:18:43

Rear View Mirror (Remove and Replace)

Correction Code 15050202

Removal

  1. Use a trim tool to release the clips that secure the lower rear view mirror cover. Remove the cover.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  2. Disconnect the rear view mirror electrical connector.
  3. Twist the stay arm clockwise approximately 120 degrees until the rear view mirror assembly pulls free.
    Informational PurposesAn informational icon, calling your attention
    Note
    Components have been removed in this graphic to aid clarity.
  4. Remove the rear view mirror assembly from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

  1. Ensure that no wires are pinched between the mirror covers.