2020-03-03

Switch - Window Lift - Driver's (Remove and Replace)

Correction Code 11502502

Removal

  1. Remove the driver's door trim panel (refer to procedure).
  2. Move the NVH padding aside to access the switch pack.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  3. Disconnect the electrical connector from the switch pack.
  4. Remove the screws (x3) that secure the switch pack to the door trim panel (torque 0.5 Nm).
  5. Remove the switch pack by lifting it through the opening in the door trim panel.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.