18/03/2022 01:51:51

Sensor - Parking Distance - S3/S4 - Front (Remove and Replace)

Correction Code 17271052

This procedure applies to front parking sensors S3 and S4.

Removal

  1. Remove the front fascia assembly Fascia Assembly - Front (Remove and Install).
  2. Disconnect the park assist sensor connector.
  3. Carefully release the park assist sensor from the fascia retaining ring.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the o-ring is also removed with the sensor.

Installation

Installation procedure is the reverse of removal.