28/08/2020 11:58:21
Headlight Assembly - LH (Remove and Replace)
Correction Code 17400102
Removal
- Remove the underhood storage unit (refer to procedure).
- Remove the front fascia (refer to procedure).
-
Remove the bolts (x2) that secure the base of the headlight to the bracket
(torque 4.7 Nm).
-
Remove the bolts (x2) that secure the top of the headlight to the bracket
(torque 4.7 Nm).
-
Disconnect the harness from the rear of the headlight.
- Remove the headlight from the vehicle. Place the headlight on a soft, clean surface.
- Remove the inner bracket from the headlight (refer to procedure).
- Remove the outer bracket from the headlight (refer to procedure).
Installation
Installation procedure is the reverse of removal, except for the following:
- Transfer the inner and outer brackets to the new headlight.
- Adjust the headlight (refer to procedure).
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.