03/03/2020 13:18:43
Center Console Assembly (Remove and Install)
Correction Code 15190101
Removal
- Open both front doors and one of the 2nd row doors.
- Remove the center console air outlet (refer to procedure).
- Remove the rear center console trim (refer to procedure).
- Remove the LH and RH center console closeout extensions (refer to procedure).
- Remove the storage center compartment bin (refer to procedure).
-
Remove the screw that secures the front of the center console (torque 2.5 Nm).
- Remove the front cup holder dividers, then remove the rubber mat at the base of the console.
-
Remove the front bolts that secure the base of the center console (torque 2.5
Nm).
-
Working in the footwell areas, remove the bolt that secures each side of the center
console to the instrument panel carrier (torque 2.5 Nm).
-
Remove the bolts that secure the rear of the center console to the vehicle (torque
7.5 Nm).
-
Working from the RH footwell, disconnect the USB electrical connector.
-
Release the fir tree clip that secures the 12V electrical connector to the
center console.
-
Disconnect the 12V electrical connector.
- Position the LH front seat all the way forward and the RH front seat all the way back.
- Slide the center console upwards and towards the rear of the vehicle to remove it.
- Set the console onto a padded surface.
Installation
Installation procedure is the reverse of removal, except for the following:
CAUTION
Replace any broken clips.