2020-03-03

Latch - Hood (Remove and Replace)

Correction Code 11352002

Removal

  1. Remove the front underhood apron (refer to procedure).
  2. Release both hood latch cables (x2) from the latch assembly.
  3. Disconnect the harness connector from the LH side of the latch assembly.
  4. Remove the bolts (x2) that secure the latch to the front end module (FEM) (torque 10 Nm).
  5. Remove the latch assembly from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Apply approximately 0.1 grams of RheoGel TEK676 grease to both of the areas shown.
    Front latchRear latch