03/03/2020 13:18:43

Center Console - 2nd Row (Retrofit)

Correction Code 15352006

Removal

  1. Open all doors.
  2. Move the LH and RH front seats fully forward.
  3. Remove and discard the 2nd row floor mat.
  4. Remove the LH welcome plate (refer to procedure).
  5. Remove the screw that attaches the LH rear sill panel to the body, and then remove the LH rear sill panel from the vehicle.
  6. Repeat steps 4 and 5 on the RH side of the vehicle.
  7. Put masking tape on the rear cup holder trim of the front center console to prevent damage.
  8. Lift the front of the middle 2nd row floor panel toward the rear of the vehicle, and then remove and discard the floor panel from the vehicle.
  9. Remove and discard the foam insert that is located between the 2nd row seats.

Installation

  1. Install the new middle 2nd row floor panel.
    The new middle 2nd row floor panel has a cutout for the 2nd row center console.
  2. Remove the masking tape from the rear cup holder trim.
  3. Install the RH rear sill panel and secure it with 1 screw (torque 2.5 Nm).
  4. Install the RH welcome plate (refer to procedure).
  5. Repeat steps 3 and 4 on the LH side of the vehicle.
  6. Set in place the 2nd row center console into the vehicle.
  7. Install the bolts (x4) that attach the 2nd row center console to the vehicle (torque 25 Nm)
  8. Install the front panel on the 2nd row center console.
    The 2 U-bell clips go to the top of the front panel.
  9. Install the new 2nd row floor mat.
  10. Restore the front seats back to their original position.
  11. Close all doors.