03/03/2020 13:18:43
Pinch Sensor (2nd row) - Front - LH (Remove and Replace)
Correction Code 11354402
Removal
- Remove the rear door speaker (refer to procedure).
-
Disconnect the pinch sensor electrical connector.
-
Release the fir tree clip that secures the pinch sensor harness to the
door.
-
Use a plastic trim tool to remove the push clips (x7) that secure the pinch
sensor to the door.
CAUTIONCare must be taken to avoid damage to paintwork and exterior trim.CAUTIONCare must be taken to avoid damage to the harnesses behind the pinch sensor.
-
Release the pinch sensor harness grommet by pulling it away from the door. Pull
the pinch sensor harness out through the grommet in the rear of the door
shell.
- Remove the pinch sensor from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
CAUTION
Replace any broken clips.
- Ensure proper operation of the pinch sensor.