30/11/2022 02:18:10

Duct - Fascia - HVAC (Remove and Replace)

FRT No: 18501002

Removal

  1. Remove the Homelink module, if equipped (refer to procedure).
  2. Release the fastener that secures the Homelink bracket to the fascia HVAC duct, then remove the bracket from the vehicle (torque 5 Nm).
  3. Remove the ambient air temperature sensor (refer to procedure).
  4. Remove the air quality sensor (refer to procedure).
  5. Remove the front upper grille (refer to procedure).
  6. Release the clips that secure the harness to the duct.
  7. Release the fasteners that secure the duct to the carrier (torque 7 Nm).
  8. Remove the duct from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following: