23/12/2022 00:28:55
Fan - Backrest - Driver Seat (Remove & Replace)
Removal
- Open the driver's door and lower the window.
- Connect a laptop to the diagnostic port of the vehicle, and then use Toolbox 3 to locally connect to the vehicle. See Toolbox 3 (Connect and Disconnect).
- Select the Dashboards tab and search for "Infotainment".
-
In the Infotainment dashboard, select the Vehicle Configuration tab and read the configuration for "seat_vent".
NoteIf fans are Futuris, they must be replaced in pairs by Kongsberg fans. For seat cushion fan replacement, see Fan - Cushion - Driver Seat (Remove & Replace).NoteIf fans are Kongsberg, they can be replaced individually.
- Move the LH front seat forward.
- Open the LH rear door.
-
Release the toe kick straps from both
sides of the interior seat base.
Note2x hook clips
-
Remove the clips (x12) that attach the
LH front seat back to the seat.
NoteStarting at the top of the seat back, use a plastic trim tool and work your way down till all 12 clips are released.
-
Disconnect the seat back fan
connector.
-
Release the lower seat back fan
assembly clips (x2)
NoteRelease the lower seat back assembly clips but do not fully remove the fan assembly yet.
-
Release the upper seat back fan
assembly clips (x2), and then remove the fan from the seat.
NoteRelease the upper seat back fan assembly clips and pull the seat back fan assembly downward to release it from the seat back.
Installation
-
Install the clips (x4) that attach the
seat back fan assembly to the seat back.
NoteInsert the upper seat back fan assembly clips to the seat back and then press the lower seat back fan assembly to the seat back to engage the lower clips. Use a plastic trim tool to help seat the lower seat back assembly clips.
-
Connect the seat back fan assembly
connector.
-
Install the clips (x12) that attach
the driver's seat back onto the lower seat assembly.
NoteReplace any broken or missing metal clips for the rear seat back.
-
Attach the toe kick straps to both
sides of the interior seat base.
- If the seat cushion fan is Futuris, it must be replaced as well. See Fan - Cushion - Driver Seat (Remove & Replace).
-
Update the "seat_vent" configuration
parameter value as required. See Gateway Configuration (Display and Change).
Configuration parameter values:
- 0: NONE (seats not ventilated, not applicable for this procedure)
- 1: FUTURIS (both front seats Futuris)
- 2: L_FUTURIS_R_KONGSBERG (LH seat Futuris, RH seat Kongsberg)
- 3: L_KONGSBERG_R_FUTURIS (LH seat Kongsberg, RH seat Futuris)
- 4: KONGSBERG (both front seats Kongsberg)
- Disconnect the laptop from the vehicle.