03/03/2020 13:18:43

Trim - Liftgate - Middle (Remove and Replace)

Correction Code 15111902

Remove

  1. Remove the lower liftgate trim (refer to procedure).
  2. Remove the push clips (x4) that attach the bottom of the middle liftgate trim to the liftgate.
  3. Remove the liftgate pull cup from the liftgate.
  4. Remove the liftgate speaker grille (refer to procedure).
  5. Starting from the top, release the heart flex clips that attach the middle liftgate trim to the liftgate.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace any broken clips.
  6. Support the middle liftgate trim, and then disconnect the electrical connector for the interior light.
  7. Remove the middle liftgate trim from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

  • Transfer the NVH pad to the new middle liftgate trim.
  • Use a piece of felt tape to attach the clips to the liftgate trim panel. Do not use grease or glue to secure the clips to the liftgate trim panel.