03/03/2020 13:18:43

Radiator (Remove and Replace)

Correction Code 18301002

Removal

  1. Remove the cooling fan module assembly (refer to procedure).
  2. Place the cooling fan module on a flat, clean surface with the radiator facing up.
  3. Release the RH side of the radiator from the open-ended retaining clips on the condenser fan shroud bracket. Pivot the radiator towards the LH side of the condenser.
  4. Release the radiator from the condenser fan shroud bracket and lift it up off of the condenser.

Installation

Installation procedure is the reverse of removal.