03/02/2022 14:24:35

Wheel Arch Liner - Rear - LH (Remove and Replace)

Correction Code 12011102

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
"Jack mode" must be activated on vehicles with air suspension before lifting the vehicle. Failure to do this might lead to suspension damage and could cause serious personal injury.
Informational PurposesAn informational icon, calling your attention
Note
Vehicles with air suspension might need the suspension to be set to "High" or "Very High" to allow the vehicle to be positioned and supported correctly on a vehicle lift.

Removal

  1. Remove the rear wheel. See Wheel Assembly (Remove and Install).
  2. Remove the push clips (x14) that secure the wheel arch liner.
    Base of wheel arch liner Top of wheel arch liner
  3. Remove the nuts (x4) that secure the wheel arch liner to the studs on the chassis (torque 6 Nm).
  4. Remove the rear wheel arch liner.

Installation

Installation procedure is the reverse of removal.