03/03/2020 13:18:43

Speaker - Dash - Center (Remove and Replace)

Correction Code 21211602

Remove

  1. Remove the mesh grille (refer to procedure).
  2. Release the screws (x2) that secure the center speaker to the IP carrier (torque 2.3 Nm), but do not fully remove the speaker at this time.
  3. Gently pull the speaker out of the IP carrier and disconnect the harness.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not allow the harness to fall into the IP carrier.
  4. Remove the speaker from the vehicle.

Installation

Installation procedure is the reverse of removal.