26/07/2023 16:57:36

Motor - Active Spoiler (Remove and Replace)

Correction Code 12221002

Removal

  1. Remove the LH and RH active spoiler torque rods (refer to procedure).
  2. Remove the bolts (x3) that secure the active spoiler motor to the liftgate (torque 6 Nm).
  3. Maneuver the active spoiler motor out from the liftgate and remove it from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

  • After installation, calibrate the rear spoiler:
    1. Connect a laptop with Toolbox 3 to the vehicle.
    2. Unlock the vehicle gateway. See Gateway Unlock.
    3. In Toolbox 3, click the Actions tab, type "X_Spoiler" into the search field, click PROC_BCREAR_X_SPOILERSearch for routine in ToolboxRun BCREAR Spoiler Routine, click Run, and allow the routine to complete.
    4. Disconnect Toolbox and remove the laptop from the vehicle.