19/12/2024 06:51:52

Condenser (Remove and Replace)

Correction Code 18201002

  • 2024-12-19: Added Note on separately adding correction code 18200102.
Informational PurposesAn informational icon, calling your attention
Note
This procedure requires the A/C Refrigerant (Recovery and Recharge) procedure to be performed. If not already automatically added to the Service Visit, add correction code 18200102 as a separate activity to the Service Visit.

Removal

  1. Remove the radiator (refer to procedure).
  2. Release the tab that secures the RH side of the condenser to the condenser fan shroud.
  3. Release the tab that secures the LH side of the condenser to the condenser fan shroud and pivot the condenser towards the LH side of the condenser fan assembly.
  4. Lift the condenser off of the condenser fan assembly. Retain the condenser fan assembly.

Installation

Installation procedure is the reverse of removal.