03/03/2020 13:18:43
Latch - Liftgate (Remove and Replace)
Correction Code 11355002
Removal
- Remove the middle liftgate trim (refer to procedure).
- Disconnect the electrical connector from the liftgate latch.
-
Remove the screws (x2) that secure the liftgate latch to the liftgate (torque 10
Nm).
-
Unhook the cinching cable from the eyelet on the latch assembly.
-
Use a pick to release the cinching cable from the retaining clip on the latch
assembly.
- Remove the liftgate latch assembly from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the following:
- Power the cinch motor until the correct alignment is reached. Open the liftgate and torque tighten the bolts.