02/07/2023 19:34:13

Horn - Tone - Pair (Remove and Replace)

Correction Code 17530102 17530202 17530302

Informational PurposesAn informational icon, calling your attention
Note
The high tone horn is on the LH side of the vehicle and the low tone horn is on the RH side of the vehicle.

Removal

  1. Open the LH front door.
  2. Raise and support the vehicle. See Raise Vehicle - 2 Post Lift.
  3. Remove the front fascia assembly. See Fascia Assembly - Front (Remove and Install).
  4. Release the push connectors (x2), and then remove the bolt that secures the low tone horn to remove the low tone horn from the vehicle.
    9 Nm (6.6 lbs-ft)
    Use of the following tool(s) is recommended:
    • Ratchet/torque wrench
    • 10 mm socket
  5. Release the push connectors (x2), and then remove the bolt that secures the high tone horn to remove the high tone horn from the vehicle.
    9 Nm (6.6 lbs-ft)
    Use of the following tool(s) is recommended:
    • Ratchet/torque wrench
    • 10 mm socket

Installation

  1. Install the bolt that secures the low tone horn, and then connect the push connectors (x2) to install the low tone horn.
    9 Nm (6.6 lbs-ft)
    Use of the following tool(s) is recommended:
    • Ratchet/torque wrench
    • 10 mm socket
  2. Install the bolt that secures the high tone horn, and then connect the push connectors (x2) to install the high tone horn.
    9 Nm (6.6 lbs-ft)
    Use of the following tool(s) is recommended:
    • Ratchet/torque wrench
    • 10 mm socket
  3. Install the front fascia assembly. See Fascia Assembly - Front (Remove and Install).
  4. Remove the vehicle from the lift.
  5. Close the LH front door.