27/03/2023 10:30:27
Sensor - Temperature - Cabin - LH (Remove and Replace)
Correction Code 18107532
Remove
- Remove the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
- Remove the bolts (x2) that attach the LH upper B-pillar trim to the vehicle (torque 3 Nm).
-
Release the clips (x3) that attach the LH upper
B-pillar trim to the vehicle, and then carefully
release the trim from the vehicle.
CAUTIONThe upper B-pillar trim will still be attached to the driver seatbelt and an electrical harness.
- Disconnect the electrical harness from the LH cabin temperature sensor.
- Remove the screws (x2) that attach the LH cabin temperature sensor to the LH upper B-pillar trim (torque 0.5 Nm), and then remove the sensor from the trim.
Install
Installation procedure is the reverse of removal.