03/03/2020 13:18:43

Lamp - Brake - High Mounted (Remove and Replace)

Correction Code 17402502

Removal

  1. Remove the spoiler applique (refer to procedure).
  2. Remove the RH side liftgate trim (refer to procedure).
  3. Remove the RH catch basin cover.
  4. On the RH side of the liftgate, disconnect the high mounted brake lamp electrical connector.
  5. Close the liftgate.
  6. On the RH side of the spoiler, pull the harness for the high mounted brake lamp through the hole in the spoiler stanchion.
  7. Release the high mounted brake lamp harness from the channel on the top of the spoiler.
  8. Remove the bolts (x8) that secure the high mounted brake lamp to the spoiler (torque 1.5 Nm).
  9. Release the double sided tape that secures the high mounted brake lamp to the spoiler.
  10. Remove the high mounted brake lamp from the spoiler.

Installation

Installation procedure is the reverse of removal, except for the following:

Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.
  1. Replace the double sided tape on the high mounted brake lamp.
  2. Ensure that the high mounted brake lamp harness is routed correctly through the channel on top of the spoiler.
  3. Press the high mounted brake lamp upwards and inwards to ensure that it is seated properly.
  4. Ensure proper operation of the high mounted brake lamp.