03/03/2020 13:18:43

Sensor - Level - Windshield Washer Reservoir (Remove and Replace)

Correction Code 17501902

Removal

  1. Remove the front LH wheel arch liner (refer to procedure).
  2. Position a container to collect any spillage.
  3. Disconnect the level sensor electrical connector.
  4. Remove the level sensor from the washer reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note installed position of components before removal.

Installation

Installation procedure is the reverse of removal, except for the following:

Informational PurposesAn informational icon, calling your attention
Note
Inspect the O-ring for damage and replace if necessary.
  1. Ensure that the level sensor is oriented correctly.