05/10/2020 14:58:33

Riser - Front Seats - Inner (Remove and Replace)

Correction Code 13012402

Special tools required for this procedure:

Supplier Part Number Description
Tesla 1032900-00-A Heat Inductor Tool (NA)
Tesla 1032900-01-A Heat Inductor Tool (EU)
Tesla 1032900-02-A Heat Inductor Tool (UK)

Removal

  1. Remove the LH and RH front seats (refer to procedure).
  2. Remove the center console (refer to procedure).
  3. Use a trim tool to release the clips that secure both covers to the RH side of the inner seat riser.
  4. Use a trim tool to release the clips that secure both covers to the LH side of the inner seat riser.
  5. Remove and discard the bolts (x4) that secure the inner seat riser to the body of the vehicle (torque 34 Nm). Remove the washers (x2).
    Informational PurposesAn informational icon, calling your attention
    Note
    If the bolts are difficult to remove, use the heat inductor tool to heat each bolt for 20 seconds, and let the bolt sit for 2 minutes before removal.
  6. Release the push clips that secure the harnesses to the inner seat riser.
  7. Remove the inner riser from the vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all patchbolt(s).
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.