03/03/2020 13:18:43

Seal - Steering - Dash (Remove and Replace)

Correction Code 32010802

Remove

  1. Open the LH front door.
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not latch the LH front door for the reminder of this procedure.
  2. Remove the HV battery (refer to procedure).
  3. Remove the bolt and nut that secure the upper intermediate shaft to the lower I-shaft link (torque 49 Nm).
  4. Separate the upper and lower intermediate shafts by pushing the upper intermediate shaft towards the steering wheel.
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not turn the upper intermediate shaft to prevent misalignment of the steering wheel.
  5. Lower the vehicle.
  6. Remove the LH footwell cover assembly (refer to procedure)
  7. Remove the bolt that secures the upper intermediate shaft to the steering column (torque 30 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not turn the upper intermediate shaft to prevent misalignment of the steering wheel.
  8. Remove the upper intermediate shaft from the vehicle.
  9. Remove the seal from the vehicle.

Installation

Installation procedure is the reverse of removal.