2023-08-10

Steering Rack (LHD) (3rd Generation) (Remove and Replace)

Correction Code 32013102

  • 2023-08-10: Reorganized the procedure.
This procedure is for vehicles built after April 24, 2019.
See also:

Removal

  1. Remove the front subframe assembly. See Subframe Assembly - Front - 2nd Generation (LHD) (Remove and Install).
  2. Remove the front stabar assembly from the subframe.
  3. Remove the bolts (x3) that attach the steering gear assembly to the front subframe.
    Use of the following tool(s) is recommended:
    • 21 mm socket
    • Flex head ratchet/flex head torque wrench

Installation

  1. Install the bolts (x3) that attach the steering gear assembly to the front subframe.
    167 Nm (123.2 lbs-ft)
    Use of the following tool(s) is recommended:
    • 21 mm socket
    • Flex head ratchet/flex head torque wrench
    • Ratchet/torque wrench
  2. Install the front stabar bar on the subframe assembly.
  3. Remove the front subframe assembly. See Subframe Assembly - Front - 2nd Generation (LHD) (Remove and Install).