26/07/2023 17:02:31

Motor - Seat Track - 2nd Row - LH (Remove and Replace)

Correction Code 13021002

Removal

  1. Remove the LH outer seat track (refer to procedure).
  2. Remove the fasteners that secure the motor to the side of the seat (torque 29 Nm).
  3. Disconnect the seat motor harness.
  4. Remove the fasteners that secure the motor to the seat (torque 4 Nm).
  5. Remove the seat track motor from the seat.

Installation

Installation procedure is the reverse of removal, except for the following:
  1. Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect).
  2. Unlock the vehicle gateway. See Gateway Unlock.
  3. To disable seat install mode, in Toolbox 3, click the Actions tab, type "Seat-Install" into the search field, click PROC_BCREAR_X_SEAT-INSTALL-MODE-OFFSearch for routine in ToolboxSeat Install Mode Off (Monopost Seats), click Run, and allow the routine to complete.
  4. In Toolbox 3, click the Actions tab, type "PROC_BCS2L" in the search field, click PROC_BCS2L_R2-L_CALIBRATE-S2L-TRACKSearch for routine in ToolboxCalibrate 2nd Row Seat - Left Track, click Run, and allow the routine to complete.
  5. Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect and Disconnect).