06/04/2023 01:03:23

Negative Cable - 12V Power (Remove and Replace)

Correction Code 17012502

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the 12V power supply is disconnected, do not attempt to open any doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.
Informational PurposesAn informational icon, calling your attention
Note
Before disconnecting the 12V power supply, ensure that the driver’s door window is fully open. Failure to follow this instruction could result in vehicle lockout.

Removal

  1. Remove the under storage unit. See Underhood Storage Unit (Remove and Replace).
  2. Remove the HEPA filter. See Filter - HEPA (Remove and Replace).
  3. Remove the cowl screen drain hose. See Hose - Drain - Cowl Screen (Remove and Replace).
  4. Disconnect 12V power. See Disconnect 12V Power.
  5. Remove the nut that connects the electromechanical brake booster to the ground (torque 2.5 Nm).
  6. Remove the bolt that attaches the 12V power ground cable to the body (torque 15 Nm).
  7. Release the edge clip and the barrel clip from the battery cage.
  8. Remove the HEPA filter duct. See Duct - HEPA Filter (Remove and Replace).
  9. Use a clip prytool to release the clips (x2) that attach the negative cable to the vehicle.

Installation

  1. Route the negative cable in place.
  2. Install the clips (x2) that attach the negative cable to the vehicle.
  3. Install the HEPA filter duct. See Duct - HEPA Filter (Remove and Replace).
  4. Install the edge clip and the barrel clip to the battery cage.
  5. Install the bolt that attaches the 12V power ground cable to the body (torque 15 Nm).
  6. Install the nut that connects the electromechanical brake booster to the ground (torque 2.5 Nm).
  7. Connect 12V power. See Disconnect 12V Power.
  8. Install the cowl screen drain hose. See Hose - Drain - Cowl Screen (Remove and Replace).
  9. Install the HEPA filter. See Filter - HEPA (Remove and Replace).
  10. Install the under storage unit. See Underhood Storage Unit (Remove and Replace).