29/09/2020 08:10:38

Switch - Rear Door - B-Pillar - LH (Remove and Replace)

Correction Code 11333702

Removal

  1. Release the upper B-pillar trim panel. See Trim - B-Pillar - Upper - LH (Remove and Replace).
  2. Disconnect the electrical connector from the bottom of the rear door switch.
  3. Remove the screws (x3) that attach the rear door switch to the upper B-pillar trim panel (torque 2 Nm).
  4. Release the rear door switch from the retaining clips on the upper B-pillar trim panel.
  5. Remove the rear door switch from the vehicle.

Installation

Installation procedure is the reverse of removal.