02/03/2020 13:50:14

Cover - Seat Back - Driver's (Remove and Replace)

Correction Code 13041002

Removal

  1. Move the driver's seat fully forward.
  2. Starting from the top of the seat back cover, use a trim tool to release the clips (x12) that secure the seat back cover.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    The carpet is still attached to the bottom of the seat back cover.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  3. Release the clips (x3) that secure the carpet to the bottom of the seat back cover.
  4. Remove the seat back cover. Place the seat back cover on a soft, clean surface.

Installation

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace any broken clips.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Take care not to scratch or damage the outside of the seat back cover during handling.
  1. Make sure that the foam piece did not fall from the rear of the headrest.
    Figure 1. Foam highlighted
  2. Install the seat back cover working from the bottom to the top of the seat.
  3. Make sure that the seat back cover is fully secured to the seat.
  4. Return the seat to its original position.