03/03/2020 13:18:43

Pump - Windshield Washer Reservoir (Remove and Replace)

Correction Code 17501002

Removal

  1. Remove the front LH wheel arch liner (refer to procedure).
  2. Position a container to collect any spillage.
  3. Disconnect the washer pump electrical connector.
  4. Release the washer tube from the pump and drain any fluid from the reservoir into the container.
    Informational PurposesAn informational icon, calling your attention
    Note
    Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  5. Remove the pump from the washer reservoir.

Installation

Installation procedure is the reverse of removal, except for the following:

Informational PurposesAn informational icon, calling your attention
Note
Inspect the O-ring for damage and replace if necessary.