16/05/2022 23:11:42

Harness - Rear Fascia (Remove & Replace)

Correction code 17101102

Removal

  1. Remove the rear fascia. See Fascia Assembly - Rear (Remove and Install)
  2. Place the fascia on a padded surface.
  3. Disconnect the electrical harness from the parking distance sensors (x6).
  4. Remove the clip, the sticky pads (x2) and the edge clips (x6) that attach the rear fascia harness to the rear fascia, and then remove the rear fascia harness.

Installation

Installation procedure is the reverse of removal.