2020-03-03
Motor - Fan Assembly - Rear HVAC (Remove and Replace)
Correction Code 18103102
Removal
- Remove the rear PTC heater (refer to procedure).
- Remove the screw that secures the 12V harness bracket to the rear HVAC assembly (torque 1.2 Nm).
- Disconnect the electrical connector from the fan motor.
- Remove the screws (x3) that secure the fan motor (torque 1.2 Nm).
- Remove the fan motor from the rear HVAC assembly.
Installation
Installation procedure is the reverse of removal, except for the following:
- Clean the interior of the HVAC casing prior to assembly.